Chatillon DFS Series

	Home \| Contact Us \| News
\| \| \| \|

PRODUCTS

MANUFACTURERS

Ametek Chatillon
Lloyd Instruments
Mark 10
MSI
Mettler Toledo
Ohaus
Shimadzu

Chatillon^®

DFS Series

Digital Force Gauge With Integral Loadcell

The Chatillon DFS Series offers the best price performance of any digital force gauge available today. This compact, easy-to-use force gauge is designed for basic and complex applications. Ideal or handheld or test stand applications, the DFS may be equipped with integral load cells or smart remote sensors for load measurement or torque measurement. Measurement accuracy is better than +/-0.1% full scale. A large, easy-to-read, high resolution dot matrix LCD display supports a variety of standard gauge functions including normal and peak readings, high/low limits, set points, pass/fail results, statistical results, load averaging, load comparisons, % and sharp break detection, load cell actuation and direction. Loads are displayed in ozf, gf, lbf, kgf and N units. The display can be inverted and displayed results may be "hidden" from the operator.

The DFS gauge comes standard with an RS-232 cable, carrying case, battery adapter/charger, testing accessories and NIST Certificate of Calibration with data. The DFS is supplied with Nexygen DF Series Software.

Standard Gauge Measurement Functions

Normal Tensile and Compression Measurement

Peak Tension and Compression Measurement

Sharp and % Break Detection

Contact Closure

Pass-Fail Limits

High & Low Set-Point Limits

Load Average

Time Average

Load Comparison

Statistical Calculations

Model	ozf	gf	lbf	kgf	N
DFS-250G	8 x 0.002	250 x 0.05	0.5 x 0.0001	0.25 x 0.0001	2.5 x 0.0005
DFS-002	32 x 0.005	1000 x 0.1	2 x 0.0002	1 x 0.0001	10 x 0.001
DFS-010	160 x 0.02	5000 x 0.5	10 x 0.001	5 x 0.0005	50 x 0.005
DFS-025	400 x 0.05	10000 x 1	25 x 0.002	10 x 0.001	100 x 0.01
DFS-050	800 x 0.1	25000 x 2	50 x 0.005	25 x 0.002	250 x 0.02
DFS-100	1600 x 0.2	50000 x 5	100 x 0.01	50 x 0.005	500 x 0.05
DFS-200	-	-	200 x 0.02	100 x 0.01	1000 x 0.1
DFS-500	-	-	500 x 0.05	250 x 0.02	2500 x 0.2


Common Accessories
Type	Part No.	Cap.	Thread	Mates To	Standard
Chisel Point	SPK-FMG-008A	100 lbf	#10-32F	#10-32M	Option
Point	SPK-FMG-009A	100 lbf	#10-32F	#10-32M	Option
Notch	SPK-FMG-010A	100 lbf	#10-32F	#10-32M	Option
Flat	SPK-FMG-011A	100 lbf	#10-32F	#10-32M	Yes
Hook	SPK-FMG-012A	50 lbf	#10-32F	#10-32M	Yes
Hook	SPK-FMG-012B	100 lbf	#10-32F	#10-32M	Yes
Extension Rod	SPK-FMG-013A	100 lbf	#10-32F	#10-32M	Option
Chisel Point	SPK-FMG-008B	500 lbf	5/16-18F	5/16-18M	Option
Point	SPK-FMG-009B	500 lbf	5/16-18F	5/16-18M	Option
Notch	SPK-FMG-010B	500 lbf	5/16-18F	5/16-18M	Option
Flat	SPK-FMG-011B	500 lbf	5/16-18F	5/16-18M	Yes
Hook	SPK-FMG-012C	500 lbf	5/16-18F	5/16-18M	Yes
Extension Rod	SPK-FMG-013B	500 lbf	5/16-18F	5/16-18M	Option
Battery Charger, 120V	SPK-DF-US120	US Plug			Yes
Battery Charger, 230V	SPK-DF-UK230	UK Plug			Yes
Battery Charger, 230V	SPK-DF-UK230	EU Plug			Yes
Carrying Case	SPK-DF-118				Yes

DF Series gauges having a capacity of 100 lbf or below have a #10-32M thread. DF Series gauges with capacities over 100 lbf have a 5/16-18M. Accessories are capacity dependent-only one accessory of a like type is supplied based on the force gauge capacity ordered.